The new Phantom 4 Pro+ V2.0 features an OcuSync HD transmission system, which supports automatic dual-frequency band switching and connects to DJI Goggles wirelessly. Like the Phantom 4 Pro and Advanced, the Phantom 4 Pro+ V2.0 is equipped with a 1-inch 20-megapixel sensor capable of shooting 4K/60fps video and Burst Mode stills at 14 fps. Plus, its FlightAutonomy system includes dual rear vision sensors and infrared sensing systems for a total of 5 directions of obstacle sensing and 4 directions of obstacle avoidance.
Camera With 1-Inch 20MP Sensor
The onboard camera has been redesigned to use a 10inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed. I effect, it is as powerful as many traditional ground cameras. More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.
1-Inch 20-Megapixel CMOS
Sensor size is more important to image quality than the number of pixels because a larger sensor captures more information in every pixel, improving dynamic range, signal-to-noise ration, and low light performance. The 1-inch 20MP CMOS sensor in the Phantom 4 Pro+ V2.0 is almost four times the size of the predecessor. It uses larger pixels and has a maximum ISO of 12800 as well as increased contrast. It is good enough for images to be sued immediately, while also capturing enough detail for advanced post-processing.
Production Optimized 4K
An enhanced video processing system allows video to be captured in cinema and production optimized DCI 4K/60 at a bitrate of 100Mbps, enabling you to get high-res slow motion shots. The Phantom 4 Pro+ V2.0 also supports the H.265 video codec.
High Resolution Lens
The resolution and contrast of a lens is critical to image quality, because only a quality lens can capture sharp, vivid photos at high resolutions. The brand-new Phantom 4 Pro+ V2.0 camera has an aerial optimized F2.8 wide-angle lens with a 24mm equivalent focal length. It features eight elements – 2 aspherical, arranged in seven groups that fi into a smaller, more compact frame. Its images are consistently detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid. For the first time ever with a DJI camera, MTF (Modular Transfer Function) results have been made public so people can get a better understanding of lens performance.
Capture Every Moment
Aerial imaging is not only used to capture landscapes; it brings new perspectives to everything from action scenes to motor racing. Capturing objects moving at high speed has always been a challenge for flying cameras using an electronic shutter. The Phantom Pro+ 4 V2.0 is the first DJI Phantom to use a mechanical shutter and a large-aperture prime lens. A mechanical shutter with a max speed of 1/2000s eliminates rolling shutter distortion which can occur when taking images of fast moving objects at high speed. The electronic shutter has also been improved with a max shutter speed of 1/8000 seconds, and a new Burt Mode shoot capable of shooting 14 fps at 20 MP to catch the perfect moment.
5-Direction of Obstacle Sensing
FlightAutonomy is expanded wit an additional set of high-resolution stereo vision sensors placed at the rear in addition to the pair placed at the front as well as infrared sensing systems placed on the left and right sides. This network creates a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance, protecting the Phantom from more obstacles and giving filmmakers the confidence to capture more complex images.
6-Camera Navigation System
Three sets of dual visions sensors form a 6-camera navigation system that works constantly to calculate the relative speed and distance between the aircraft and an object. Sing this network of forward, rearward and downward vision sensors, the Phantom 4 Pro+ V2.0 is able to hover precisely in place without GPS when taking off indoors, or on balconies, or even when flying through windows with minimal pilot control. In the unlikely event that front and downward sensors are unable to operate, the aircraft can still hover in place using the rear stereo vision system. The Phantom 4 Pro+ V2.0 is also able to fly in complex environments at a flight speed of up to 31mph(50kph) while avoiding obstacles in its path. In Narrow Sensing Mode, the Phantom 4 Pro+ V2.0 narrows its sensing scope enabling it to see in more detail and fly through small spaces.
What Is FlightAutonomy
FlightAutonomy is an advanced aerial intelligence and flight automation platform. It is made up of a complex network of ten component groups including seven cameras – forward, rearward and downward dual vision sensors and the primary camera – an infrared sensing system, dual-band satellite positioning (GPS and GLONASS), two downward facing ultrasonic rangefinders, redundant IMUs and compasses, and a group of powerful, specialized computing cores. The Phantom acquires a real-time view of its environment and information about the height and position of nearby obstacles to create a 3D map it can locate itself within. The IMU and compasses collect crucial flight status, speed and direction data, while redundant IMUs and compasses monitor critical data and rule out possible errors, dramatically enhancing the reliability of flight.
Infrared Sensing System
The Phantom 4 Pro+ V2.0 is the first DJI aircraft to use an infrared sensing system. Placed on the left, and right sides of the aircraft, these measure the distance between the aircraft and any obstacles using infrared 3D scanning. When in Beginner Mode and Tripod Mode, these sensors have a horizontal field of view of 70 degrees and a vertical field of view of 20 degrees, providing a wide view f the scene to the sides of the Phantom, and a maximum range of 23ft(7m). Traditional ultrasonic sensors only have a detection range of 3-5m and may be confused when affected by propeller vibration. The infrared sensing system is unable to sense larger areas and measure the distance between the aircraft, identifying the closest objects accurately while avoiding interference, providing more reliable sensing and protection.
OcuSync Remote Controller with Built-In Screen
A 5.5-inch 1080p screen integrated with the Phantom 4 Pro+ V2.0 controller offers 1000 cd/m of brightness, more than twice as bright as conventional smart devices. As the DJI GO app is built into the screen, hardware and software are fully optimized, allowing you to edit and share instantly. Along with the controller's five-hour battery life and 4.3mi OcuSync transmission, the Phantom 4 Pro+ V2.0 is a complete aerial imaging solution.
New OcuSync Video Transmission
The Phantom 4 Pro+ V2.0's remote controller uses OcuSync video transmission, which employs time-division multiplexing technology to send control signal and receive video signal simultaneously. When the controller is powered on, the OcuSync system scans for the frequency band with the lowest interference and switches accordingly to maintain clear transmission.
Also, thanks to OcuSync, the Phantom 4 Pro+ V2.0 wirelessly connects to DJI Goggles. Free from cable constraints, you can enjoy exciting FPV flight at speeds of up to 72kph in S-mode.
See A Different World
The Phantom 4 Pro+ V2.0 wirelessly connects to DJI Gogggles putting you directly in the heart of the action with dual LTPS displays that offer a high-quality 1080p live camera view with an 85 degree FOV. Connect via OcuSync, users can experience fast and clear FPV flight with incredibly low latency. Plus, controlling your Phantom with DJI Goggles is more intuitive than ever, Just enable Head Tracking, which allows you to move the aircraft or gimbal simply by turning your head.
New aerodynamic 9455S propellers and new FOC ESC drivers offer improved noise control and sinusoidal current for increased stability. Aircraft noise has been reduced by up to 4dB (60%) for quieter, more enjoyable flights.
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro+ V2.0 has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO 4 app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health.
Phantom 4 Pro+ V2.0 Highlights:
- A 5.5-inch 1080p screen integrated in the controller
- 30 Mins Flight Time
- 7 km Control Range
- 4 dB Noise Reduction
- 4K 60fps
- 30 m Sensor Range
- 5-Direction of Obstacle Sensing
All DJI products have a 1 (one) year limited warranty*
through DJI and will be serviced directly through DJI.
You can contact DJI for support by phone at 1-818-235-0789
Or online by clicking on the following link http://www.dji.com/support
DJI products cannot be returned or exchanged through Visions Electronics.
* Refresh cards/codes are final sale and accessories warranty will vary please see warranty tab.
Before you fly your unmanned air vehicles (UAV) more commonly called drones
Transport Canada regulates the use of UAV to keep the public and our Canadian airspace safe.
Make sure you understand the rules that apply and follow them.
For more information see Transport Canada's website by clicking on the following link:
Drone Safety - Transport Canada