Insta360 Vibration Damper (CINSTBAA)

Insta360

Vibration Damper

Keep shooting no matter how rough the ride.

Significantly reduce the impact of intense vibrations on the camera.

Innovative Design.

Unique six spring structure provides maximum vibration damping.

Only the finest materials.

Pure mechanical structure of metal outer layer results in high stability and reliability.

How to Use

1. Mount camera onto Vibration Damper

Align the screw hole on the bottom of the camera (or mount adapter) with the 1/4" screw on the Vibration Damper. Turn the knob on the Vibration Damper to secure the camera onto the Vibration Damper. You can also tighten it by inserting the wrench into the knob holes.

2. Install the Vibration Damper

Install the Insta360 Motorcycle U-Bolt Mount (sold separately) or the Handlebar Mount onto your motorcycle or bicycle. Then install the Vibration Damper onto the mount using the 1/4" mounting point.

Notes

1. When mounting a camera onto the vibration damper, please hold the device firmly to ensure the camera doesn't fall off.

2. Do not use the Vibration Damper with cameras that weigh over 250g (8.8oz)

3. The Vibration Damper can only be used with the Insta360 Motorcycle U-Bolt Mount or the Handlebar Mount.

4. The recommended maximum speed while using the product with a motorcycle is 80km/h.

5. The Vibration Damper is not waterproof or dustproof. Only use it in dry, clean environments.

6. The Vibration Damper is compatible with multiple Insta360 action cameras (including but not limited to ONE X2 and ONE R).

Compatibility

• X3
• ONE RS
• GO 2
• ONE X
• ONE R
• ONE X2