Hertz 10" Active Sub Enclosure (CBA250-OPENBOX)

Hertz CBA 250 Active Sub Enclosure

Features

1. Integrated 500 W peak/250 W rms @ 0.4 Ω D-Class amplifier featuring he-li technology (high efficiency / low impedance) without switching power supply, for a performance next to ideal.
2. Butterworth low-pass filter at 12dB/Oct. with variable cutting frequency (50-200 Hz), phase control (0 - 180°) and adjustable bass-boost 0÷6 db @ 45Hz.
3. Defeatable filter to use the sub dedicated output of a processor.
4. High level audio input on multi-pin connector for maximum OEM integration and low level on RCA for aftermarket sources.
5. ART turn on function (Automatic Remote Turn-On) selectable among: Remote-in, Hi-level, Audio signal.
6. Box with ultra-low profile (6.22 in. / 158 mm) in air suspension, designed to take full advantage of the performance of the 10-inch high-impedance driver.
7. The SSP (Sub Smart Plug) terminal block is provided with a Plug&Play connector to be able to disconnect the box easily and safely.
8. The 2S² (2 Sides / 2 Sounds) design provides the ability to select between Down-Firing positioning to increase the low frequency extension and Up-Firing install to obtain more punch and definition.
9. Down-firing levelling feet with Velcro inserts included for a secure grip with the carpet, ensuring extreme ease of removal.
10. Rounded corners allow easy placement in the trunk and act as a reinforcement to reduce enclosure resonances.
11. Exclusive design of the cone, dust-cap and basket geometry to achieve a wide linear excursion (9 mm in one direction), keeping the depth required for assembly to a minimum.
12. HRC AP remote control included.
13. Sturdy metal grille included, for a total protection of the subwoofer driver.

Technical Specifications

• Component: Active Sub Box
• Power Output: 250 Watts RMS, 500 WAatts Peak Power
• Integrated 500 Watts Peak Mono Amp w/ Adjust Low-Pass Filter
• External Bass Control Included for Remote Bass Level Control
• High Level and RCA Input for Easy Integration
• Magnet: High density flux ferrite
• Cone: water-repellent pressed paper
• Subwoofer voice coil: 60mm (2.36 in)